Author: jedreynolds
-
Lionel Train Board
I assembled the planks with 3/8 screw-eyes and zip ties. I didn’t want to attempt sawing any tongue-in-grove joints (that would have taken forever).
-
DIY Lionel Train Track Power
I could not find the O-gauge track clip that allows you to interface with the transformer, so I got some copper wire soldered on there. I later secured the leads with another zip tie down to the black plastic base and then wrapped the wire tabs with electrical tape. The wire tabs I made sure…
-
Christmas Pageant at Bellingham Unitarian
This was a fun event to shoot. It was not so fun to post-process since really had to keep these pictures on the stove a long time to boil off some darkness. (Makes me consider getting a new camera body.)
-
Shutterfly #fail
Some poor IT is prolly going to get fired for misconfiguring his reverse proxy. They are probably losing a lot of service because people going to the cart are **publicly** getting redirected to 172.16.97.37. This is a non routable address.
Bitratchet 