Maple dice box

I came across a 2×6 scrap of what I’ve been told is maple. I sawed it up into a few dice boxes that I’m using my router to hollow. Each is going to be finished with linseed oil, but constructed in slightly different manners. This one is the first time I’ve used brass threaded inserts, which are surprisingly fragile.

I enjoy the look of the separation that exposed the grain.

And three magnets seem to keep it closed well enough. I might use more or use bigger magnets on the next ones.

Troll dice

Made these out of a reclaimed piece of 4×10. Threw out quite a bit of eaten wood and threw out the ones that started to issue termites.

Next time, I will use forstner bits or drill ahead of time and trim them down on the table saw to correct the chip out.