Next Scrap

This beautiful piece of wood was passed on from an instrument builder, it looks like a perfect species for a fretboard. It’s 1-1/4″ thick. I desire 7/8″ for dice to slide, and 13/16″ is narrow enough to make them wedge.

I have some narrow gauge saw blades but not nearly so thin as a band saw blade. So if my kerf is 1/8″, I have problems. I cannot see how to make dice boxes tall enough to have the nice presentation face as a lid without using a separate 6″ slab to cut from.

It might be possible to carefully join a second piece of wood into the spare 4″ scrap from four 6″ boxes, but pairing this wood with something uninspiring is unattractive. I don’t have an acrylic mix, which might be fun.

I’m unsure how to finish this wood, too. Is linseed going to darken it? I used linseed on Jesse’s bass neck and it was perfect, but that was totally different wood. I guess it would be sensible to cut a piece off the end and treat it to see the effect.

Maple dice box

I came across a 2×6 scrap of what I’ve been told is maple. I sawed it up into a few dice boxes that I’m using my router to hollow. Each is going to be finished with linseed oil, but constructed in slightly different manners. This one is the first time I’ve used brass threaded inserts, which are surprisingly fragile.

I enjoy the look of the separation that exposed the grain.

And three magnets seem to keep it closed well enough. I might use more or use bigger magnets on the next ones.